6.6 kW OBC and 1.5 kW DC/DC in one IP67 enclosure
The GC-INT-6.6KW-1.5KW integrates a 6.6 kW AC on-board charger and a 1.5 kW DC/DC converter (14 V, 107 A) in one IP67 enclosure. It charges 72 V to 540 V traction batteries and supplies the vehicle 12 V system from the same unit, saving space, wiring and installation time. It communicates over CAN 2.0B.
Core parameters
Published core parameters for GC-INT-6.6KW-1.5KW. Detailed electrical data, environmental ratings and mechanical drawings are provided in the datasheet on request.
| OBC rated output power | 6 600 W @ 220 VAC / 3 300 W @ 110 VAC |
| AC input voltage | 90–264 VAC, 45–65 Hz, 32 A max |
| OBC output | 25–710 VDC (72–540 V nominal), 60 A max |
| DC/DC output | 14 V nominal (10–15 V), 107 A, 1 500 W |
| OBC peak efficiency | ≥93 % @ 220 VAC |
| Power factor | ≥0.98 @ 110 VAC, ≥0.97 @ 220 VAC |
| Cooling | Fan cooled |
| Ingress protection | IP67, epoxy potted |
| Communication | CAN 2.0B / enable |
| Dimensions (L × W × H) | 378 × 270 × 119 mm |
| Operating temperature | −40 °C to +85 °C (derating above 85 °C) |
Key features
Two functions, one housing
6.6 kW OBC plus 1.5 kW DC/DC in a single enclosure.
Lower system cost
One mounting position, one connector set and shorter harnesses.
Wide charging range
Seven variants from 72 V to 540 V, with output ranges up to 710 V.
14 V 107 A auxiliary output
Replaces a separate DC/DC for lights, controllers and 12 V loads.
IP67, epoxy potted
Sealed against water and dust; resistant to vibration.
CAN 2.0B control
Enable pin optional; CAN fault protection.
Model selection
| Model | Nominal voltage | Rated current | Output range |
|---|---|---|---|
| GC-INT-6.6KW-1.5KW-7260 | 72 V | 60 A | 25–100 V |
| GC-INT-6.6KW-1.5KW-8460 | 84 V | 60 A | 60–120 V |
| GC-INT-6.6KW-1.5KW-10860 | 108 V | 60 A | 45–177 V |
| GC-INT-6.6KW-1.5KW-14446 | 144 V | 46 A | 50–202 V |
| GC-INT-6.6KW-1.5KW-19233 | 192 V | 33 A | 64–278 V |
| GC-INT-6.6KW-1.5KW-31220 | 312 V | 20 A | 110–450 V |
| GC-INT-6.6KW-1.5KW-54014 | 540 V | 14 A | 170–710 V |
All variants include the 14 V (10–15 V) 107 A DC/DC output.
Applications
- Electric cars and pickupscombined charging and 12 V supply
- Delivery vans and logistics EVsfewer components to install
- Cargo tricycles and low-speed EVsspace saving in compact chassis
- Electric trucks, concrete mixers and cleaning vehiclessealed IP67 construction
- Ambulances and special vehicleshigh 14 V current for onboard equipment
Matched to your battery, not the other way round
We customise output voltage, charging current, charging curve, CAN protocol, cable length, connectors, housing and labelling. Share your battery voltage window, chemistry, capacity and target current and our engineers will propose a matching configuration.
Datasheets on request
Datasheets, test reports, wiring diagrams, CAN protocol files and 3D models for the GC-INT-6.6KW-1.5KW are available on request — tell us the quantity and destination market and we will send the full package.
Tell us your battery. We will match the unit.
Send your battery voltage window, chemistry, capacity and target current — our engineers will propose a matching configuration.